A battery is an electrochemical cell that is charged externally to store electrical power. The stored power of the battery is released when it is needed for various applications that could be required for normal day to day working, back-upoperations, critical applications or for emergencies. The use of batteries is increasing every day in order to drive / support various applications such as Cars, Motor Cycles, UPS, Generators, Auto mobiles, Emergency Lights, Solar Power etc.
A battery is expected to always perform flawlessly as per its capacity. However sometimes even new batteries fail and hence periodic testing and maintenance of batteries is required. It is important to also test incoming batteries as a part of the quality control procedure to ensure proper compliance of the supply made by the battery manufacturer. The loss of battery capacity occurs gradually of ten without the knowledge of the user. The function of the Battery Meters CLTM-18 and CLTM-63 is to check the capacity condition of various lead acid storage batteries and to ensure that the supported equipment is adequately backed-up, prevented from unexpected failures and forewarned for any calamity. The battery tester helps to identify the weak batteries so that they can be re-charged or weeded out of the system before they make the complete system unreliable.
CLTM-18 is a portable Automobile Battery Meter which can check the capacity condition of different typesof Motorcycle and Motorcar batteries from 2 to 200Ah. The product consists of aLoad Resistor and Testing Clip. The state of the battery is indicated on the meter dial as 'FULL UP' (White), 'NORMAL' (Green), 'RECHARGE' (Yellow),'DISCHARGRE' (Red) directly.
MECO BM63 is a portable Battery Meter which can check the capacity condition of different types of batteries from 4 to 500Ah.
The product consists of a DC Voltmeter, Load Resistor and Testing Clip. The state of the battery is indicated on the meter dial as 'OK'(Green), 'WEAK' (Yellow) and 'BAD' (Red) directly.